Transported MaterialMaterial stuck to the belt falls down at return path. This causes material loss. Material stuck to the belt are scraped and drop to the chute. Material loss is prevented.
    Environment Falling material causes serious environmental pollutionUse of scrapers helps you to keep the environment clean.
Rolls/DrumsMaterial stuck to the belt is passed to the roll and drum in time. Friction increases, the belt is decentered.Rolls and drums operate orderly on the surface of clean belt. Use life increases.
Motor / ReducerPower consumption increases, motor may burn in overloading.Power consumption stays at normal level..
Maintenance and cleaningCleaning bottom of the belt, replacing the rolls and drums, repairing the torn belts require high workmanship cost and long term stop.Cleaning the skimmers which skim the belt increases scraping performance and provides saving from workmanship, material and stop costs.

BELT SCRAPER

Belt conveyors must certainly be cleaned for eff ective and effi cient operation. Damages to occur in the events when the belt is not cleaned and the stop periods are so much over the required scraper costs.

Stop is the greatest cost in the continuously producing plants!

FACTORS WHICH AFFECT SKIMMING

  • Correct scraper selection
  • Correct installation and adjustment
  • Smooth belt surface
  • Regular maintenance and cleaning 

POLYURETHANE TIP HEAVY TYPE PRIMARY SCRAPER

Polyurethane tip primary scraper are designed to exhibit high scraper performance in any hard condition.

 Double side spring supports of the system enable the minimization of material escape through long term and continuous stress at the facilities producing especially in hard conditions.

Maintenance and tip replacement time of our product which has a feature of easy plugging is very short. Polyurethane tip has A80 hardness and operates in a range of -40°C to +90°C.

Primary scrapers generally reduce material escape by 70-75%. For this reason, we recommend using a scraper. Applicable to all width bands.

SECONDARY TUNGSTEN CARBİDE TİP SCRAPER

Secondary scraper are designed to perform the

Performance of the primary scraper used in the belts operating especially in hard and diffi cult conditions is in a range of %70 – %75. Due to this reason, the secondary scraper to be mounted after the driving drum are very important for belt cleaning.

TUNGSTEN CARBIDE TIP NEW GENERATION SECONDARY SCRAPER

New generation heavy type scraper are designed to show high performance for a long time.

 Double side spring supports of the system enable the minimization of material escape through long term and continuous stress at the facilities producing especially in hard conditions.

 It complies with all curves of the belt by means of its renewed elastic modular structure and turning motion in two axes

TUNGSTEN CARBIDE TIP LIGHT TYPE SECONDARY SCRAPER

Light Type Main Scrapers are designed to fi t into narrow positions at the dumping points of the belts. They are mounted to a secondary position.

It is used especially in problematic cases such as dumping from belt to belt and proximity of the belt and chute intake. It has very high performance in the clearing of fi ne dusty or humid sticky materials from the belt surface. It provides high skimming performance by absorbing the impacts by means of the rubber hubs. It is proposed for conveyor systems with belt width up to 2000 mm and speed 3m/sec. It is used both in double and single direction belts by means of its special design and tensioning system.

V SCRAPER

 It cleans internal side of the belt. In general, it is used to prevent the jamming of materials coming to the internal side of the conveyor between the tail pulley and the belt.

 Stress pressure may be varied by means of belt stressing mechanism and setting is very easy. Polyurethane tips are long lasting. It is applied in a range of 500 ‒ 2400 mm belts.

BELT BRUSHES

 They are used on belts on which more sensitive cleaning is required or herringbone belts on which the scraper canʼt be used.

 It provides longer operation for long time use by means of its adjustable structure and PA6 brush hair. A mud scraper part may be integrated as per its position of use. Drum and motor driven types are available. It is produced as per all belt widths.